Refine your search
Collections
Co-Authors
Journals
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Maheshwari, Sachin
- Element Transfer Study of Developed Agglomerated Fluxes during Submerged Arc Welding
Abstract Views :369 |
PDF Views:4
Authors
Affiliations
1 Noida Institute of Engg. & Technology, Gr. Noida - 201 306, IN
2 National Institute of Technology, Kurukshetra, IN
3 Netaji Subhas Institute of Technology, New Delhi, IN
1 Noida Institute of Engg. & Technology, Gr. Noida - 201 306, IN
2 National Institute of Technology, Kurukshetra, IN
3 Netaji Subhas Institute of Technology, New Delhi, IN
Source
Indian Welding Journal, Vol 47, No 1 (2014), Pagination: 57-65Abstract
The aim of this work is to study the chemistry of element transfer in respect to developed agglomerated flux constituents during submerged arc welding. Fluxes have been designed by altering different minor constituents e.g. MnO, CaF2, NiO, MgO and Fe-Cr. The ratio of major constituents i.e. CaO, SiO2 and Al2O3 has been kept as a constant. Through this study it could be inferred that the chemical analysis of the element transfer during submerged arc welding can be correlated with the mechanical properties.Keywords
Submerged Arc Welding, Element Transfer Study, Agglomerated Fluxes.
- Development of a Mathematical Model for Predicting Angular Distortion in Butt Welded Stainless Steel 409M Plates in GMAW Process
Abstract Views :269 |
PDF Views:6
Authors
Affiliations
1 MPA Engineering Division, NSUT, New Delhi, IN
1 MPA Engineering Division, NSUT, New Delhi, IN
Source
Indian Welding Journal, Vol 53, No 1 (2020), Pagination: 57-66Abstract
Angular distortion is almost inevitable in fusion welding processes as it involves localized heating and cooling of materials. Keeping the weld distortion to its minimum is the endeavor of every weld engineer as excessive distortion can not only spoil the physical appearance but also can cause mismatch of joint in fabricated structures. In the present investigative work, an attempt was made to predict the influence of input weld parameters like wire feed rate, voltage, speed of welding and the angle of groove on angular distortion, by developing a mathematical model. This was accomplished by developing a mathematical equation which included the direct, quadratic and interaction effects of input weld parameters and could be used to predict the effects of these parameters on the resulting angular distortion. The experimentation was carried out in a structured manner by using Central Composite Face Centered Design (CCFD) technique. All the selected welding parameters were taken at three levels to accommodate the curvature effect. The final model was developed by using regression analysis and its adequacy was tested by Analysis of variance (ANOVA) approach. Response surface methodology (RSM) was used to graphically plot direct and interaction effects of weld parameters on angular distortion. The validity of the developed model was checked by conducting test runs at different values of input parameters. The comparison of actual and predicted results indicated good conformance.Keywords
Angular Distortion, Fusion Welding, Weld Parameters, Mathematical Model, Regression Analysis.References
- Seong WJ (2019); Prediction and Characteristics of Angular Distortion in Multi-Layer Butt Welding, Journal of Materials, 12, pp.1-19.
- Kozak J and Kowaslski J (2015); Problems of Determination of Welding Angular Distortions of T-Fillet Joints in Ship Hull Structures, Polish Maritime Research, 22, pp.79-85.
- Arifin A, Gunawan, Mataram A, Yani I, Pratiwi DK, Yanis M and Sani KA (2019); Optimization of Angular Distortion on Weld Joints Using Taguchi Approach, Jurnal Kejuruteraan, 31(1), pp.19-23.
- Duhan S, Mor A and Malik D (2015); A Review of Angular Distortion and Its Prevention Techniques, International Journal of Recent Research Aspects, pp.135-137.
- Kumar A (2011); Effect of Various Parameters on Angular Distortion in Welding, International Journal of Current Engineering and Technology, pp.132-136.
- Yukler A I, Kurtulmus M and Dogan E (2018); Angular Distortion in Butt Arc Welding, International Journal of Engineering Science and Application, 2(4), pp.137-144.
- Murugan Vel V and Gunaraj V (2005); Effect of Process Parameters on Angular Distortion of Gas Metal Arc Welded Structural Steel Plates, Welding Journal Supplement, 84, pp. 165s-171s.
- Arya SK (1985); Development of mathematical models for angular distortion in butt welds, M.Tech Thesis submitted to the Department of Mechanical Engineering, IIT, Delhi, India.
- Arya SK and Parmar RS (1986); Mathematical models for predicting angular distortion in CO shielded flux 2 cored arc welding, Proceedings of the International Conference on Joining of Metals (JOM–3), Denmark, pp. 240–245.
- Mochizuki M and Okano S (2018); Effect of Welding Process Conditions on Angular Distortion Induced by Bead-on-plate Welding. ISIJ International, 58(1), pp.153-158.
- Murugan N and Gunaraj V (2005); Prediction and control of weld bead geometry and shape relationships in submerged arc welding of pipes, Journal of Material Processing Technology, 168, pp.478-484.
- Murugan M (1993); Some Studies on Metal Surfacing, Ph.D. Thesis submitted to the Department of Mechanical Engineering, IIT Delhi, India.
- Mostafa NB (1992); Flux cored arc welding of high strength low alloy steel, Ph.D. Thesis submitted to the Department of Mechanical Engineering, IIT Delhi, India.
- El-Gendy N, Madian HR and Abu ASS (2013); Design and optimization of a process for sugarcane molasses fermentation by saccharomyces cerevisiae using response surface methodology, International Journal of Microbiology.
- Akhnazarova S and Kafarov V (1982); Experiment Optimization in Chemistry and Chemical Engineering, Mir Publishers, Moscow.
- Khuri AI and Cornell JA (1987); Response Surfaces– Design and Analysis, Marcel Dekker Inc., New York.
- Cochran WG and Cox GM (1963); Experimental Designs, Asia Publishing House, New Delhi.
- Hill HE and Prane JW (1984); Applied Techniques in Statistics for Selected Industries, John Wiley & Sons, New York.
- Davies OL (1978); The Design and Analysis of Industrial Experiments, Longman Group Limited, New York.
- Adler YP, Markov EV and Granovsky YV (1975); The Design of Experiments to Find Optimal Conditions”. MIR Publishing, Moscow.
- Box GEP, Hunter WG and Hunter JS (1978); Statistics for Experimenters, An Introduction to Design, Data Analysis, and Model Building, John Wiley & Sons New York.